Power Control Centre

Switchboard assemblies used for low voltage power distribution are mostly called Power Control Centres. These PCC controls, monitor & provide continuous supply to connected loads through breakers. If something goes wrong with the power source or load, the power control centre fitted with breakers cut down supply to the affected portion and the rest of the system stays healthy.

Best Suited For

  • Construction and Engineering
  • Data Center/Colocation/Hosting
  • Education
  • Fire/Alarm/Security
  • Government
  • Healthcare
  • Manufacturing
  • Commercial & Residential Projects
  • Hotels
  • Infrastructure
  • Telecom

Features

  • Fully bolted structure
  • Ease in handling, transportation and maintenance
  • Easily extensible on either side, makes the enclosure future proof.
  • Single front & double front construction.
  • Available in double bus bar system and any feeder can be tapped from any of the bus system.
  • Multi-Tier compartmentalized Circuit Breaker Panel
  • Load Distribution through ACBs and MCCBs
  • Arrangement for Receiving supply through Power Cable / Bus Duct
  • Doors can be hinged on either side offering greater flexibility to configure the panel as per the site conditions.
  • Standard sizes available off the shelf, thus cutting down lead time and inventory carrying cost

TECHNICAL SPECIFICATIONS

Parameters SPECIFICATIONS
Rated Operational Voltage 3Phase, 415/690 V AC
Rated Frequency 50 Hz
Rated Current Up to 5000 Amp
Rated Service Voltage 500/690 V AC
Rated Insulation Voltage 1000 V
Dry Power Frequency Withstand Voltage 3KV For 1 Minute
Short Time Current 65 KA For 1 Sec
Temperature rise 40 oC above Ambient 45 oC
Form of segregation Form-3b/Form-4b
Degree of Protection Up to IP 54
Metal Sheet Thickness 2mm/1.6mm
External Surface Protection Epoxy Powder Polymerized at High Temperature
Painting Thickness more than 60 micron
Standard Colour Grey RAL 7035
Bus bars Aluminium / Copper
Bus bar Supports SMC / DMC / FRP
Standard Compliance IS 8623, IS 13947, IEC 61439
Standard Depth of Switchboards - 1000/1200/1600 mm
Standard Feeder Width - 500/600/700/800/1000mm

TOP