G8 Power factor Controller
Salient Features
- G8 Advanced Power Factor Controller
- Backlight graphic display 128×80 pixels with excellent legibility and adjustable intensity
- master slave function
- GSM / GPRS Model (optional)
- Optical port on front
- Current & Voltage Harmonic analysis
- Independent compensation for all 3 phases
- Capacitor over-current protection on all 3 phases
- The wide measurement range between 100 to 690VAC allows to use the controller in most types of applications
- USB and Wi-Fi communication interface for PC, Smartphone & tablet o
- Rs232, RS485 communication interface (Optional)
- Modbus®-RTU and ASCII communication protocols
- Set-up and remote-control software (Optional)
- SMS sending for alarm conditions with expansion module (Optional)
Description
| Technical Data | Description |
| Voltage Circuit | |
| Auxiliary supply | 100-440VAC |
| Frequency | 50/60Hz ±10% |
| Voltage Input | |
| Rated voltage | 600VAC L-L(346VAC L-N) |
| Frequency range | 45-65Hz |
| Current Input | |
| Rated current | 1A or 5Aconfigurable |
| Connection | Single Phase Connection |
| Measurement and Control | |
| Power Factor adjustment | 0.8 ind to 0.8 cap |
| Voltage measurement range | 50-720VAC L-L; 50-415VAC L-N |
| Current Measurement range | 0.025-1.2Afor 1Afull scale |
| Current Measurement range | 0,025-6Afor 5Afull scale |
| Type of voltage and current measurement | TRMS |
| Relay Output | |
| 8 Output built-in | 8 Stage with 2 extandable modules. |
| Output arrangement | normally open |
| (NO/SPST) contact | except the last being a changeover (SPDT) |
| Rated capacity | IECAC1 5A250VAC AC15 1.5A440VAC UL/CSAB300 general use |
| Communication Protocol | |
| Modbus | RTU,ASCII and TCP |
| Degree of Protection | IP54 from Front,IP20 at terminals |
| Certification and Compliance | |
| Certifications obtained | cULus, EAC. |
| Compliant with standards | IEC/EN 61010-1, IEC/EN 61000-6-2, IEC/EN 61000-6-4, UL508, CSAC22.2 n 14 |
